As long as your trailer equipped with a lunette ring is within the 5,000 lb weight limit of the MaxxTow # MT70034 and your lunette ring fits within the tangs of the clevis hitch (see attached photos) you can definitely use this with a lunette ring. Please note that your lunette ring can't be more then 2-1/2" thick.
You will also need a hitch pin & clip like part # PC3 or a locking hitch pin like part # e98880, as well as the clevis pin itself like part # CP20. view full answer...
The Blaylock EZ Lock Trailer Coupler Lock for Lunette Ring Couplers part # BLTL-60 will work with any padlock that has a 3/8" diameter shackle or smaller like the Master Lock Stainless Steel Padlock with Shielded Shackle part # ML40D. It is also offered with this lock using the Blaylock EZ Lock Trailer Coupler Lock for Lunette Ring Couplers part # BLTL-60-40D. view full answer...
To lock the pin that comes with the Curt SecureLatch Lunette Ring # CU79FR you need a padlock with a 5/16" shackle and for that I recommend the Master Lock Laminated Steel Padlock # ML1KA. view full answer...
There is not an adapter so you'll just need a pintle hook for your hitch to attach to your trailer's lunette ring. Depending on what size hitch you have there are a pair of options:
- 2" Hitch: Curt Pintle Hook # C48004
- 2-1/2" Hitch: Curt Pintle Hook # C48010
Both of these will need to be secured to your hitch with either Pin and Clip # ML1465DAT or Hitch Lock # e98881. view full answer...
The Buyers Products 45 Ton 6-Hole Air Compensated Pintle Hook # 337P45AC6 can handle lunette rings with an inner diameter from 2.38" to 3.00" wide. If you don't already have the lunette ring you could use one like the Buyers Products 3" I.D. Heavy-Duty Forged 4-Bolt Mount Lunette Ring # 337BDB1394. view full answer...
Yes, the Demco Trailer Coupler w/ 5-Position Adjustable Channel item # DM6125-97 can also be used with a Lunette ring. For this I recommend the Buyers Products Plain 10-Ton Forged Steel Lunette Ring w/ 3" I.D. item # 337B16140.
The adjustable channel is 3" wide on the inside of the channel and the bolt holes are spaced at 2" apart. The Lunette ring fits 3" channels and has an identical bolt spacing.
This combination will give you a 20,000 lbs towing capacity. view full answer...
Yes, there are actually 2 Curt channel brackets you can use with lunette ring # C48660. There is a 5-position option, # C48650, and a 3-position option, # C48610. For hardware use # C48620. I have linked a video of the lunette ring for you. view full answer...
I do have a great option for you, however the Curt Lunette Ring # C48560 that you referenced will not work with the TorkLift Magnum Pintle Hook Mounting Plate Adapter # TLM9002. I went out to our warehouse and measured a bolt pattern on the Magnum Mounting Plate of 3-3/8" horizontally (center to center) and 1-1/2" vertically (center to center).
The Curt Lunette Ring features bolt hole spacing of 4-1/2", both horizontally and vertically.
The Magnum Pintle Hook Mounting Plate # TLM9002... view full answer...
The Demco Lunette Ring # DM09557-81 is approximately 3" wide and the holes are 1" apart center on center. This lunette ring fits in channel mounts like the Demco 6-Hole Adjustable Channel Bracket # DM59602. view full answer...
The adjustable lunette ring with channel # 63036 is rated for 24,000 pounds so provided that the gross trailer weight is under that you can use it on your trailer. Lunette rings are usually see in agricultural and industrial applications which is what your application sounds like.
The channel will need to be welded to a flat surface by a professional welder. The welds should be everywhere the channel touches the trailer for optimum strength. I have linked a video review of this lunette... view full answer...
The Convert-A-Ball their Pintle Hook Combo # PH1 is specified for a 3-inch inside diameter lunette ring for proper fit on the included pintle sleeve. However, my contact at Convert-A-Ball confirmed that a lunette ring with an inner diameter of 2-1/2-inches will fit over the pintle sleeve. I went to our warehouse and measured the sleeve and its diameter is just under 1-7/8-inches.
Do be sure to use the pintle sleeve since this part's towing capacity is based on the sleeve being installed... view full answer...
To make sure that your ring and channel have the 24000-lb capacity you're seeking and don't have to add additional parts like you would with the Curt # C48660, I recommend using the Tow Ready Adjustable Lunette Ring with Channel # 63036 . This lunette ring has the 3" and 24,000 lbs capacity you're looking for and comes with a channel and mounting bolts so that all you need to do is have it welded on. view full answer...
Unfortunately, we do not have what you need. We do have a variety of lunette rings that will fit the tongue of your trailer. You can go with something like the Titan Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black Painted - 25,000 lbs, part # T1613700.
I have included a product description link, a video demo link, and a weblink of all our lunette rings below. view full answer...
To connect your toy hauler RV travel trailer you with the Curt Lunette Ring # C48560 you will need to have a Trailer Nose Plate # 337TNP716625750 welded and gusseted in place of your current ball coupler. An easier option would be having a Demco 50-Degree A-Frame Coupler # DM15349-52 welded in place of your coupler. This coupler is rated for up to 14,000lbs and will require drilling for a A-Frame jack if your trailer requires that. Then you will be able to use the Lunette Ring # T1613700... view full answer...
The Buyers Products 15 Ton Swivel Type Pintle Hook part # 337BP125A can fit lunette rings with an inside diameter of 2-3/8" to 3". So either one would be fine as long as they are rated properly for the weight of your trailer. However, buyers recommends to use the Buyers Products 2-1/2" I.D. 4-Bolt Welded Mount Lunette Ring part # 337BDB125015W with 2-1/2" inner diameter and 7,000 lbs tongue weight rating. view full answer...
The Buyers Products 2-1/2" I.D. Weld-On Forged Steel Lunette Ring # 337LW10 is the smallest lunette ring we carry. It is 1 inch thick. I've attached a video to assist with other dimensions.
It sounds like you may need to make some slight modifications to make something compatible or you may want to replace your pintle hitch on your snowmobile with # C48005 or # C48205. view full answer...
The Buyers Products 30 Ton Pintle Hook part # 337PH30 is designed for a lunette ring that has a 2-3/8" to 3" inner diameter with 1-3/8" to 1-5/8" diameter section such as the Buyers Products Heavy-Duty Forged 4-Bolt Mount Lunette Ring part # 337BDB1394.
I have attached a dimensional drawing for you as well as a list of other options if the above will not work. view full answer...
Your 50 millimeter pintle hook is just under 2-inches (1.968-inches to be exact) and this will easily fit inside the 3-inch inner diameter of the Curt Adjustable Channel Lunette Ring # C48640. This lunette ring offers a 12K capacity and its position can be adjusted in 2-inch increments. view full answer...
It sounds like you are going to need the Buyers Products 2-1/2" I.D. Forged Alloy Steel Lunette Ring with Nut # 337BDB12503 that fits a 1-1/2" mounting hole.
I checked the Buyers Products 3" I.D. Forged Alloy Steel Lunette Ring with Nut # 337BDB12492H in our warehouse and confirmed with Buyers Products that it has a 2"-4.5 thread pitch. This would require a 2" hole to mount the ring.
The Curt Lunette Ring # C48530 with a m48-5 will also require a 2" mounting hole. view full answer...